How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a distinct set of steps to take to add the second key. It requires dealer service using a handheld computer called Tech-2. Then a new key and transponder are required to be purchased and then programmed into the car.
It is an excellent idea to rotate your keys in order that one doesn't get worn out more quickly than the other. This will help to keep your keys in perfect condition.
Replacement Case
The new key fobs do not look like the older Saab keys. They have electronics that make them difficult to copy. This has made car theft considerably more complicated than it was 20 years ago. It also makes it more costly to replace keys that were lost.
Saab 9-3 owners should have two keys working. If one gets lost, it is expensive to replace it in the car since it requires replacing the CIM module and programming the locking cylinders. Dealers charge between $100-$200 to do this.
There are ways to avoid the high cost. Some parts providers can look up the code on an old key (usually the same one that opens the doors and turns off the ignition) and cut a new key blade from metal for just a fraction of dealer cost. The key must be the exact same as the original for it to function in your vehicle.
You can also replace the case yourself by following these steps. You will need an flathead screwdriver and patience. Utilizing the screwdriver, slowly pull the plastic apart and remove the emergency key from the case. After the case is open take out all electronic components and place them in the new case. Place the key with the correct badge into the case.
Replacement Battery
The replacement battery for the Saab 9-3 is an inexpensive component that can be replaced quickly and easily. Cyclone's YouTube video Cyd shows how to replace the battery of the remote fob with just four steps. This tutorial can be used with any modern Saab key fob. However, the process might differ slightly.
The first step is to locate the button that will release the backup key in the fob. This button is typically located on the back of your fob right next to the Saab Logo. Next you will need the flathead screwdriver to insert into the tiny hole in this button. This should be sufficient to open the fob case to allow you to change the battery.
After you have installed the batteries CR1632, it is possible to put back together the remote key fob. You can then program it into your car. The procedure should take no more than an hour at most. It's a very easy procedure that doesn't require any special tools.
If you lose a key the process will be a bit more involved, but it can still be completed. The dealer needs to first determine the VIN of the vehicle before requesting an additional TWICE module and key blade with the correct unique code. The dealer will then need to program the key using MDI which is a new software tool.
Replacement Key Fob
The key fob has an internal battery that is used to lock and unlock your vehicle. Batteries have a finite lifespan and eventually will die. This is a frequent issue that affects all cars. The good thing is that you can replace the battery on most key fobs without having to replace the entire case. You can buy replacement fobs from Amazon that come with all the electronic components already in place, so you'll just pop open the case and replace the old batteries. You'll need to take out the emergency key before you replace the batteries. To do saab 9-3 key not accepted contact service , you need to insert an small screwdriver with a flat head into the slot in the middle. Use the screwdriver to move around the case, and it will split open, making it easier to take it out.
If you're looking to replace your keys, make sure you have a spare on hand. This will save you a lot of money. If you do have a spare, you can have the dealer cut a new key and program it to your car, which is much cheaper than replacing the entire key fob.
It is possible to add another key to your car in the event that you don't have one, but it takes a great deal of research and work. A second key can cost around a hundred dollars and it also requires the programming of the car's computer. This can be done by a professional, but it is an expensive option for the majority of owners.
Replacement Ignition
Contrary to earlier Saab cars, the modern SAAB 9-3 models are equipped with an upgraded alarm system that is based on a coded key. This means that in the event that you lose your only working key, adding another one can be very expensive because the car needs to have a special computer module installed and it must also be programmed to accept an additional key. Dealers can even charge hundreds of dollars to program a new key in the event that they are unable to do it.
If you've lost your only working key the dealer will replace your car's computer (known as the CIM or SAAB TWICE) in order to make a replacement, and they will charge you a premium price for it. We can reprogram the current EEPROM on your car's computer so that it's prepared for a new key. This will save you more than 50% on what you would pay at a dealer.
If you've owned a SAAB 9-3 for a long time you're aware that the ignition keys aren't very durable. They can be extremely sticky and the buttons are known to be removed from them every now and then and you should think about getting a replacement if yours isn't working properly. It's not so difficult as it may seem to replace the ignition key. With the appropriate tools, it could be done quickly.